The forgotten French history of the “All American” M1 Garand rifle

The forgotten French developmental history of the All American M1 Garand rifle

– OR –

A funny thing happened in France on the way to develop a Main Battle Rifle.

Photobucket

The United States Rifle, Caliber .30, M1 aka – “M1 Garand”

The United States Rifle, Caliber .30, M1 designed by John C. Garand (Garr-Onn as pronounced by our French Canadian designer) often with the same reverence of a god or the Titan Prometheus the giver of fire. Just as Zeus’s warning to Prometheus that every gift brings a penalty – that man is happy as long as he does not gain the knowledge that can change his world.

Mr. Garand’s rifle would certainly play a part in the changes in the world. How could the M1 be any less with production in the multiple millions, the M1 rifle had the highest front line infantry distribution of any issued semi-automatic rifle of the World War II.

All American military firearms collectors have all heard the story of the later development of of the M1 rifle by John Garand, his tenacity in wanting the “primer actuated” action and his quick development of the .30 caliber rifle over the earlier .276 experiments.

Our question is where did all this come from, why the .276 and where do we trace the ideas and origins of the M1?

Photobucket

Mr. Garand with one of his prototypes (note the cocking handle and op rod).

While I was researching the development of the French MAS 49-56 rifle I came across a comment, “…the trigger group from the MAS 49/56 is so similar to the M1 it must have been a development from the M1.”

The fact is that the French MAS auto-loading rifle series has dates of development far too early for this to be the case I started to find connections to the M1 rifle, and they start in France.

Photobucket

The RSC Mle.1917 French auto-loading rifle.

Where did it start? The connection starts with the then new weapon, designed by Ribeyrolle, Sutter and Chauchat, a rifle that would become the Le fusil automatique de 8 mm RSC modele 1917 or RSC Mle. 1917.

Over 80 thousand rifles of RSC Mle. 1917 were produced for the French army in 1918. France arming it’s soldiers in large numbers with a self-loading rifle was a forward thinking concept at the time. The production numbers of the RSC Mle.1917 show a clear intent of France to equip many of it’s infantry with the rifle and attempt to change their battlefield tactical procedures.

But we need to back up a bit and talk about Mr. Garand and the connection to the Le fusil automatique de 8 mm RSC modele 1917 or RSC Mle.1917 and Mle. 1918.

Mr. Garand was born Jean Cantius Garand born in Quebec, part of a French speaking family, later Mr. Garand was to list his name in the Anglo form John. There are many articles and books focused on his famous rifle that describe some of Mr. Garand’s poor childhood and his early entry into machine design. Mr. Garand’s talents for mechanical devices and unusual ideas fill more than a few pages of historical reviews. I find Mr. Garand’s story in many ways similar to some of the aspects of Mr. Kalashnikov and his talents. Both men seem to be tireless tinkering mechanical obsessives with a few eccentricities (a sign of creativity).

What is almost always missing is the work Mr. Garand did with Springfield Arsenal where he was involved with attempts to adapt the RSC Mle. 1918 design to the 30-06 cartridge. With this early Springfield Arsenal work we now we have our direct connection from early concept rifle to the development of the United States Rifle, Caliber .30/M1. From the standpoint of management, it is understandable that a French speaking mechanical designer would be part of reviewing the rifle and accompanying French documentation.

So now we can clearly review how French rifle design had such a large impact on US military rifles. The question is why is this French rifle so forgotten when the design connection clearly is so important to US military self-loading rifle history?

My conclusion was that the “all American rifle” indeed had a French grandfather and a French Canadian father. Who would have guessed that M1 would have been that French in lineage. The closer you look the more connections you can make in the relationship from one rifle to the other. I would even propose that the .276 was a reaction to the problems with higher pressure cartridges and auto-loading rifles like the RSC Mle.1917, advanced metallurgy would of course improve and thereby negating that concern.

Photobucket

RSC Mle.1917 with bolt and op rod in the reward position.

It is like the first time you find the connection from sewing machines and gun manufacturing, history becomes both strange and interesting, unlike our old boring classes in school.

Lets start with a simple review of the two rifles with photographs.

Photobucket

The RSC Mle. 1917 trigger group, a progression from a JM Browning design, used to this day in many firearms. So in essence the trigger of the more advanced M1 is actually based on Mr. Browning’s work.

Photobucket

The M1 Garand trigger group (note the improvements).

As you can see from the photos there are clear indications that the US M1 and even later rifles have trigger groups that show a mechanical lineage to this French rifle and its earlier Browning parentage. The spring and detents of the RSC Mle. 1917 look a lot like similar parts in the much later M16, as the mechanism of the RSC Mle. 1917 is quite simple. I thought it was noteworthy how you can see the development and the source from the RSC Mle. 1917 to the M1 Garand. For any of you interested the above also shows links to the Browning Auto shotgun, the source for many derivative designs in trigger/hammer design.

The operating rod is so obvious that I am surprised this has not been noted more often (if at all).

Photobucket

RSC Mle.1917 side view with operating rod highlighted.

Photobucket

RSC Mle.1917 operating rod disassembled from the rifle.

Photobucket

M1 Garand side view with operating rod highlighted.

Photobucket

M1 Garand operating rod on a partly disassembled rifle, highlighted in blue.

The “en block” clip connection is always worthy of attention.

Photobucket

RSC Mle.1917 worm’s eye side view of the “en block” clip highlighted, note that this rifle was designed to have the clip inserted from the bottom after the casing was rotated forward.

Photobucket

M1 Garand .276 prototype with side view of the “en block” clip highlighted in blue.

The bolt group – ahead of it’s time?

Some views of the bolt group from both rifles you can clearly see the rotating mechanism and how the RSC Mle.1917 connects to it’s flat op rod and how the M1 Garand has a “floating” connection slide built into the op rod.

Photobucket

RSC Mle.1917 bolt and bolt face.

Note how the cocking handle knob threads onto a protruding shaft to connect to the op rod. Note the multiple lugs on the bolt, this complexity is one of the binding areas for contamination and fouling.

Photobucket

M1 rifle’s bolt and bolt face.

Note the improvements over similarities from the M1 bolt and it’s predecessor Garand’s improvements are many, his improved op-rod and bolt operation and simplification are noteworthy.

Patent drawings comparing the two rifle designs.

Photobucket

RSC Mle.1917 rifle drawing, note the relationship of the working parts.

Photobucket

Mr. Garand’s .276 prototype drawings.

While in no way a direct copy, clearly Garand’s review of the French rifle earlier in his life left a lasting impression and this system eventually developed into the Garand designed rifle. Some criticism could be leveled at this statement because there are so many other rifle designs that also provided features, but Garand’s exposure to the original French rifle via his employer and direct study of each rifle gives us the unmistakable direct connection.

There is no shame in admitting that “All America’s Rifle” had French origins, that is unless bumper sticker patriotism and misdirected pride is more important for one’s cognitive dissonance.

Information gathered from:

Small Arms of the World: A Basic Manual of Small Arms (12th revised edition)

By – Edward Clinton Ezell

Proud Promise, French Autoloading Rifles, 1989-1979

By – Jean Huon

The FN-49, The last elegant old-world military rifle

By – Wayne Johnson

Les fusils semi-automatiques:

Le fusil automatique de 8 mm RSC modèle 1917

Le fusil FN FAL expliqué

Par – G. Henrotin

Armes à feu de l’Armée française 1860 à 1940

Par – Jean Martin chez Crepin Leblond

L’Armement De L’Infanterie Francaise 1918-1940

éditeur – Argout – Gazette des armes

la grande aventure des fusils réglementaires français 1866-1936

éditeur – Argout – Gazette des armes

La Notice Sur Le Fusil à Répétition De 7,5 Mm. Modèle 1936

éditeur – Charles Lavauzelle & Cie

RSC 1917 et Garand

Advertisements
Categories: Firearm Overview, Firearms, History, Rifles | 2 Comments

Post navigation

2 thoughts on “The forgotten French history of the “All American” M1 Garand rifle

  1. Mike Cavanaugh

    Interesting and thoughtful; thanks for writing. I’d be interested in what recognized Garand experts’ reactions are – like Bruce Canfield.

  2. matt

    m1 garande shares many characteristics with the german rsc1906

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Blog at WordPress.com.

%d bloggers like this: